Search
Language
Language
23. March 2021
// Did you know?

Did you know?

The control panels of the Evario hospital bed

Our Evario is a bed for all hospital wards - and has customised control elements. In addition to the LCD handset, there is a choice of control panels integrated into the Protega safety side on both sides of the bed. These panels have different control interfaces on the inside and outside: On the inside of the bed, they offer simple adjustment functions that the recumbent patient can operate effortlessly. On the outside, there are further options for the nursing staff. Lasse Radtke, product management trainee at Stiegelmeyer, explains step by step how the outside of the panels can be used in daily work.

The adjustment functions of the mattress base can be "scrolled through" using the rocker button. Simply click to the right or left to show the 5 functions on the display. As soon as you stop, the displayed function is active.

It is possible, for example, to adjust the backrest or the height of the bed. Sensitive positions such as the feet-down position or the Trendelenburg position are not available on this generally accessible level to protect the patient.

If you have selected an adjustment function, you can raise or lower the mattress base elements with the large arrow buttons – here in the picture the backrest.

Very often in everyday hospital routine, backrest angles of 15°, 30° or 45° are selected to support the breathing of patients or to facilitate meals. You can directly control these three angles via pre-programmed buttons.

If you need to set the CPR position immediately in an emergency situation, press and hold the two orange CPR buttons until the bed reaches the position.

If the nurse wants to adjust positions according to medical indications, e.g. the Trendelenburg position or the locking of certain adjustments, she switches to the control level for nursing staff. To do this, simply press the gear wheel button at the top right.

 

A wide range of options is now available via the rocker button.

 

If the nurse wants to lock the backrest, for example, she first selects this function via the rocker button and then locks the backrest by pressing one of the large arrow buttons – the direction of the arrows does not matter. The patient can now no longer move the backrest electrically at his or her control level.

 

Often the nurse has locked some functions for the patient, but would like to use them herself during daily care. Unlocking the options specifically at the nursing staff level and then locking them again would take up unnecessary time. That is why we have developed the EasyCare function. The nurse presses both ends of the rocker button and the gearwheel button at the same time on the standard control level until the word EasyCare appears on the display and a signal sounds. Now all adjustment functions are temporarily unlocked. When the nurse has finished, press the gearwheel button to exit EasyCare. If he/she forgets to do this, the EasyCare mode switches itself off after 2 minutes.

Other articles which may interest you:
22. July 2014
“We have been able to significantly increase profitability over the existing surface area through process optimisation and industrialisation down to the last detail. We gradually…
more
16. July 2018
Greater safety, relief and joy in life whilst providing care at home – these are the objectives Burmeier is taking to REHACARE in Düsseldorf. The German leader on the home care…
more
17. May 2019
Visitors to our booth at the Altenpflege geriatric care fair in Nuremberg agreed: With the new Vario Safe system, Stiegelmeyer has achieved an important innovation that will make…
more
25. June 2020
Our care beds of the Elvido and Venta series feature a particularly large height adjustment range from approx. 25 to 80 cm. During adjustment, the beds make a stop at approx. 38…
more